Implementasi Metode Simple Additive Weighting dan Metode Prototipe untuk Perangkingan Guru Terbaik

Authors

  • Nurhadi Nurhadi STMIK Pranata

DOI:

https://doi.org/10.62383/polygon.v3i1.406

Keywords:

decision, support, system, SAW, prototype

Abstract

Some schools currently still use manual methods for assessment in determining the best teachers.  Giving grades to teachers is sometimes still subjective, so the risk of conflict is high due to inaccurate and non-transparent assessments, making it a problem for teachers in teaching. For this reason, an information system is needed to get accurate calculation results to get the best teacher ranking. In answering the problems found, the author developed a decision support system using the Simple Additive Weighting method to obtain accurate ranking results so that it can provide maximum decision results through faster, more accurate and precise classification and evaluation. And this research uses a prototype method as an addition to make system development easier. The results of calculations using the SAW method can determine the ranking for the best teachers. Based on a comparison between the pretest and posttest results, it was found that the conformity level was 60% for appropriate data from the 10 data used and 40% for inappropriate data.

Downloads

Download data is not yet available.

References

Adela, H., Azmi Jasmi, K., Basiron, B., Huda, M., & Maseleno, A. (2018). Selection of dancer member using simple additive weighting. International Journal of Engineering & Technology, 7(3), 1096. https://doi.org/10.14419/ijet.v7i3.11983

Andri, & Suyanto. (2020). Sistem informasi penentuan guru terbaik berbasis kinerja pada Pondok Pesantren Qodratullah. Digital Zone: Jurnal Teknologi Informasi Dan Komunikasi, 11(1), 108–119. https://doi.org/10.31849/digitalzone.v11i1.3865

Hasnain, M., Thaheem, M. J., & Ullah, F. (2018). Best value contractor selection in road construction projects: ANP-based decision support system. International Journal of Civil Engineering, 16(6), 695–714. https://doi.org/10.1007/s40999-017-0199-2

Hilabi, S. S., Fauzi, A., Tukino, Prabowo, H., Warnars, H. L. H. S., & Mursitama, T. N. (2022). Decision support system for the selection of the best political figure through social media using the Analytical Hierarchy Process (AHP) method. International Journal of Applied Engineering and Technology (London), 4(1), 122–127. https://api.elsevier.com/content/abstract/scopus_id/85139530696

Ibrahim, A., & Surya, R. A. (2019). The implementation of Simple Additive Weighting (SAW) method in decision support system for the best school selection in Jambi. Journal of Physics: Conference Series, 1338(1), 012054. https://doi.org/10.1088/1742-6596/1338/1/012054

Lia Hananto, A., Priyatna, B., Fauzi, A., Yuniar Rahman, A., Pangestika, Y., & Tukino. (2021). Analysis of the best employee selection decision support system using Analytical Hierarchy Process (AHP). Journal of Physics: Conference Series, 1908(1). https://doi.org/10.1088/1742-6596/1908/1/012023

Manurung, S. V. B., Larosa, F. G. N., Simamora, I. M. S., Gea, A., Simarmata, E. R., & Situmorang, A. (2019). Decision support system of best teacher selection using method MOORA and SAW. 2019 International Conference of Computer Science and Information Technology (ICoSNIKOM), 1–6. https://doi.org/10.1109/ICoSNIKOM48755.2019.9111550

Nurhadi, & Muhammad Ridwan. (2022). Sistem informasi inventaris berbasis web menggunakan metode prototype. Jurnal Multidisiplin Madani, 2(9), 3543–3550. https://doi.org/10.55927/mudima.v2i9.1143

Nurhadi, N. (2022a). Sistem informasi administrasi rekam medis pada klinik berbasis web menggunakan metode prototipe. IJCIT (Indonesian Journal on Computer and Information Technology), 7(2), 91–102. https://doi.org/10.31294/ijcit.v7i2.13436

Nurhadi, N. (2022b). Sistem informasi aplikasi berbasis android dan web sebagai alternatif untuk proses absensi. Device, 12(2), 58–69. https://doi.org/10.32699/device.v12i2.3529

Nurhadi, N., & Istiani, F. (2022). Model sistem informasi pengajuan kredit berbasis web pada bank perkreditan rakyat. Jutisi: Jurnal Ilmiah Teknik Informatika Dan Sistem Informasi, 11(3), 627–640.

Nurhadi, N., Khabibillah, K., Zaenudin, I., Miswadi, M., & Prihandi, I. (2024). Sistem informasi tingkat kepuasan pasien pada pelayanan makanan di rumah sakit menggunakan metode algoritma C4.5. IJCIT (Indonesian Journal on Computer and Information Technology), 9(1).

Painem, & Soetanto, H. (2019). Decision support system with simple additive weighting for recommending best employee. In International Conference on Electrical Engineering, Computer Science and Informatics (EECSI) (pp. 438–441). https://doi.org/10.23919/EECSI48112.2019.8977031

Sholehah, N., & Maspiyanti, F. (2020). Sistem pendukung keputusan pemilihan guru terbaik menggunakan metode Simple Additive Weighting dan TOPSIS. Jurnal Ilmiah Informatika, 8(02), 125. http://ejournal.upbatam.ac.id/index.php/jif/article/view/1855

Sinaga, N. A., Sugara, H., Sembiring, E. J., Manurung, M. E. M., Silaen, H., Sumantrie, P., & Siregar, V. M. M. (2022). Decision support system with MOORA method in selection of the best teachers. AIP Conference Proceedings, 2453, 030020. https://doi.org/10.1063/5.0094437

Sivaram, M., Shanmugapriya, S., Yuvaraj, D., Porkodi, V., Akbari, A., Hashim, W., Maseleno, A., & Huda, M. (2020). Decision support system for determining academic advisor using Simple Additive Weighting. In Advances in Intelligent Systems and Computing (Vol. 1040, pp. 149–156). https://doi.org/10.1007/978-981-15-1451-7_16

Torre, D., Labiche, Y., Genero, M., Baldassarre, M. T., & Elaasar, M. (2018). UML diagram synthesis techniques. Proceedings of the 10th International Workshop on Modelling in Software Engineering, 33–40. https://doi.org/10.1145/3193954.3193957

Van Dua, T. (2023). Combination of design of experiments and Simple Additive Weighting methods: A new method for rapid multi-criteria decision making. EUREKA, Physics and Engineering, 2023(1), 120–133. https://doi.org/10.21303/2461-4262.2023.002733

Vo, M. H. L., & Hoang, Q. (2020). Transformation of UML class diagram into OWL ontology. Journal of Information and Telecommunication, 4(1), 1–16. https://doi.org/10.1080/24751839.2019.1686681

Downloads

Published

2025-01-31

How to Cite

Nurhadi Nurhadi. (2025). Implementasi Metode Simple Additive Weighting dan Metode Prototipe untuk Perangkingan Guru Terbaik. Polygon : Jurnal Ilmu Komputer Dan Ilmu Pengetahuan Alam, 3(1), 78–92. https://doi.org/10.62383/polygon.v3i1.406

Similar Articles

1 2 > >> 

You may also start an advanced similarity search for this article.